2012 Hot Sale Aluminium Heat Pipe Solar Collector

1.Glass tubing manufactured using borosilicate glass 2.Coating formed by magnetron sputtering 3.Ability of anti-hail with high

Vacuum tube collectors and flat-plate collector more:

1.All-glass vacuum tube of the outer tube is equivalent to flat-plate collector cover and transparent glass shell

2.Inner tube and the outer surface of inner pipe attached to the selective absorption coating is equivalent to the heat-absorbing body flat-plate collector

3.Between inside and outside the vacuum tube equivalent flat-plate collector laminated insulation materials(insulation layer)

With heat pipe and U-tube vacuum tube

1.Does not occur simply because of a damaged and affect the operation of the system

2.Greatly reduce the heat capacity of the vacuum tube, the same weather conditions you can get more heat

Three-cavity tube is joined in the all-glass vacuum tube inside a closed glass core tube, the tube of water capacity, thus reducing the heat capacity, speed up the rate of heat transfer, thermal management of memory loss caused by water also will reduce the

All-glass vacuum tube solar collector composed of the basic structure:

1.all-glass vacuum tube2.Header (aluminum structure)3.diffuser (CPC reflectors)4.Tailstock (glass tray, can use PET material)5.Tailstock (composed of collector box with associated supporting framework)6.insulation (rock wool, polyurethane foam, etc.)7.with the tube interface (copper regulator connector)8.fin (heat sheet)9.regulator or copper heat pipe (heat medium carrier)

Material of Model:1) The pipeline is made of red copper and conducted by heat transfer medium liquid2) Temperature preservation is equipped with standard electric water heater settingautomatic temperature control exchanger, and increased anode magnesium barssticking to prevent furring 3) The insulating layer uses polyurethane bulk bubble and has a good effect of temperature preservation 4) Water tank (interior): Stainless steel inner tank5) Manifold : aluminum alloy out casing & red copper flow passage6) Glass tube: new trivalent element heat tube, borrosilicate glass 3.37) With heat pipe: anti-freezing > -35 degrees centigrade8) Water capacity: 150L, 200L, 250L, 300L, 500L 9) Pressure: 6 Bars10) Daily efficiency: >= 55%(>=42% in winter)11) Heat preservation: 72h to 80h12) Electric heater: 1.5Kw to 3Kw

13)Working efficiency: >95%

14)Heat Preservation time: 72-96hours

15)All the whole system is human-friendly design and pretty appearance which combine with building very harmoniously

Construction, installation points:

1.To install the collector (water heaters) the structure of the pre-set embedded parts or bolts, when the collector installed in the masonry wall should be constructed in the embedded parts at an additional column. Non-structural components such as lightweight fill the force shall set the collector wall

2.water in the area to be done, shall not destroy the waterproof layer

3.The bracket installation should be checked in accordance with the requirements of design drawings strength, durability, and building a fixed way

4.set up a reliable lightning protection measures

5.storage tanks must be located in the base building load-bearing walls (beams) on, and set aside fixed with embedded parts. Embedded parts and the gap between the base, the application of fine aggregate concrete filled pound dense

6.The application of water storage tank and foundation anchor bolts firmly connected

2012 Hot Sale Aluminium Heat Pipe Solar Collector